Ceiling Light Only
Rear Side Draft
Putty, Primer, Base Coat, Coat
PVC Different Color For Options
Continue Line Body Shop Paint Booth Prep Station , Prep Stations Automotive Paint
Bright full booth illumination is provided by eight (8) four-tube, LED light fixtures in the ceiling panels. Each is sealed behind clear tempered safety glass. All fixtures are made by China and approved for their intended use and placement.
1. Eexhaust motor is option.
2. Quality brand name turbo fans, directly drive type.
3. Heating system option.
4. Rear side draft air flow.
5, Continue line with rail on floor option.
6, Led light and Scheider electric components.
Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, full down air flow comes out, and extraction from rear side directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. Mount on the concrete floor, easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.
6300×3450×2650 mm (L×W×H)
6300×3450×450 mm (L×W×H)
Back side EPS wall panel, the other sides PVC curtain.
Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.
Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system
1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.
Pre-filter, ceiling filter, fibreglass filter.
Fan switch, lighting switch, emergency stop.
Hooked from roof by steel cable or supported by steel column.
6.7KW (Power supply 1×220V, 3×380V, 50HZ)