Components For Control:
Schneider Electric Components
Riello G20 Burner
At Back Side
7M Outside Down Draft Garage Spray Booth , Prep Station Spray Booth Equipment
1, Spray booth: 5.5KW turbo fan for intake, 5.5KW turbo fan for extraction.
2, Prep station: 5.5KW turbo fan for intake and exhaust.
3. Air units at back side.
4, Two sets booth side by side, plus prep station.
5, All LED lights, energy save and more illumination.
6, Color white, blue, orange and red is optional.
7, Down draft and rear side draft.
Special for the 4S body shop, continue line if needed, air flow from back side, intake and suction units from complete basement, down draft, two units booth side by side, option for the electric shutter door between two booth, and rail on the floor, car moveable from one booth to another. Specification as below for one unit only.
6900×3900×2650 mm (L×W×H)
Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, blue colour, door head and two batten on both sides white colour.
1 units, 650×1800mm (W×H), colour: white.
Galvanized steel assemble, 300mm high, quadrate steel support, two lines grilles made by flat bar and twisted steel, 2 ramps.
Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights option, with LED, lighting boxes are powered coated, illumination ≥1000LUX
Intake from back upper, exhaust from rear upper, galvanized steel frame; blue machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system
Inlet:1×5.5KW turbo fan, air capacity for each fan: 18000m3/h.
Outlet: 1×5.5KW turbo fan, air capacity for each fan: 18000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.
Italy RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.
Pre-filter, ceiling filter, fibreglass filter, activated carbon filter.
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, hour meter, temperature limiter, all motors is normal start.
11.5KW (Power supply 1×220V, 3×380V, 50HZ)
6300×3450×2650 mm (L×W×H)
6300×3450×450 mm (L×W×H)
Back side EPS wall panel, the other sides PVC curtain.
Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.
Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system
1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.
Pre-filter, ceiling filter, fibreglass filter.
Fan switch, lighting switch, emergency stop.
Hooked from roof by steel cable or supported by steel column.
6.7KW (Power supply 1×220V, 3×380V, 50HZ)