Aircraft Paint Booth

Aircraft Paint Booth

Folding Main Door LED Light Aircraft Spray Booth , Industrial Paint Systems Features 1, Centrifugal fan for intake and extraction. 2. All panels are tongue and groove interlock structure. 3, #304 stainless steel heat exchanger. 4, All LED lights, energy save and more illumination. 5, Color...

Product Details

Internal Size:

14×12×6.35m (L×W×H)

Control Box:

Schneider Components

Lights:

LED

Main Door:

Folding Type, With Hanger Rail

Exhaust:

From The Pit In The Ground

Usage:

Air Craft

Folding Main Door LED Light Aircraft Spray Booth , Industrial Paint Systems

Features

1, Centrifugal fan for intake and extraction.

2. All panels are tongue and groove interlock structure.

3, #304 stainless steel heat exchanger.

4, All LED lights, energy save and more illumination.

5, Color white, blue, orange and red is optional.

6, OEM available.

Advantage:

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean, symmetrical and steady-going down airflow for spraying. After painting, inside the drying oven, hot air goes from heating generators to plenum, then enters room after filtered by ceiling filter, hot air circulation providing heat that is necessary for baking of air craft surface. .

Spray booth specification:

Item

Detailed Specification

Inside dimension

14000×12000×6350 mm (L×W×H)

Outside dimension

14150×13920×7030 mm (L×W×H)

Front door

Folding door, 1 set, 12 folds, door size: 10200×6000 mm (W×H), square tube frame, colour: white

Emergency door

2 units, 800×2000mm (W×H), colour: white.

Basement

Without, exhaust from both 4 lines pits under ground, each line 11500×760mm(L×W), with grilles above.

Wall panel

Thickness: 70mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with 70mm thick EPS inside, EPS/14kg/m³, colour: white.

Light

Ceiling Lights: 24Units×4Pcs=96Pcs×36W, side Lights: 26Units×2Pcs=52Pcs×36W, up and down setting, with LED, lighting boxes are powered coated.

Generator cabinet

Inlet from side upper, outlet from back upper, square tube frame; white coated steel outside, galvanized steel inside, filled with heat preservation material in the middle.

Intake and Exhaust system

Inlet: 6×5.5KW centrifugal fan, power: 5.5KW for each, air capacity: 90000m3/h.

Outlet: 3×11KW centrifugal fan, belt drive, power: 11KW for each, air capacity: 90000m3/h. with manual damper, 12pcs ducts, 6pcs 90 degree bend, 3pcs 30 degree bend.

Heating system

RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper for spraying cucle, Max. heating productivity: 200000kcal/h for each set, maximum temperature: 80 degree, total 12pcs chimney, 3pcs bend.

Purification system

Pre-filter, ceiling filter, fibreglass filter, carbon filter.

Roof

50mm EPS panel.

Control system

Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop, hour meter, temperature controller, schneider components.

Total power

72KW (Power supply 3*380V, 50HZ)

 

image001.jpg

Inquiry