Paint booth safety operation procedures

- May 11, 2019-

Paint booth safety operation procedures

. All fireworks are strictly prohibited in the paint booth.

  

. First open the paint main console power main switch; open the air compressor air supply valve.

 

. Open the paint switch and exhaust fan switch to check whether the ventilation is smooth.

 

. Immediately after the vehicle enters the paint booth, the engine is turned off, and the staff members should be closed and the non-workers should not be allowed to enter.Ensure that the barn is protected from dust, oil, and wax.

  

. Construction personnel should take appropriate physical protection measures, wear anti-virus masks and put on protective overalls to ensure personal health and construction quality.

 

. Baking process:

  1. The vehicle that has been painted is allowed to stand for about 10-15 minutes at 30 °C.

  2. The temperature is raised to 65±5°C, and the baking time is not less than 30 minutes.

3. Turn off the baking switch and lower it to room temperature (may be slightly above room temperature).


. After the construction is completed, the car must be cleaned in the baking room immediately

after cleaning. Then close the paint door and close the main switch.Move all the remaining

 material away from the paint booth.

 

. The paint booth can only be operated by the paint team, and other non-technical personnel are not allowed to use it automatically.