4 Sets Infrared Lamp With Rail
Infrared Lamp Heating Tuto Paint Booth Pressure Protect Device Inverter Adjustment
1. Infrared spray booth , environmental and efficient.
2. All panels tongue and groove interlock structure
3. 4 units short wave infrared lamps with rail for heating
4. Quality brand-name turbo fans
5. LED Industry-leading light levels
6. With pressure protect device.
7. With inverter to control the air flow.
8. Schneider electric components.
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying, at the same time the inverter adjust air flow to adjust the pressure inside paint booth. After painting, the infrared heating separate control to dry the item, until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered by the air filter.
6900×3900×2650 mm (L×W×H)
Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
1 units, 800×2000mm (W×H), colour: white.
Galvanized steel assemble, 300mm high, quadrate steel support, adjustable type, full grilles made by flat bar and twisted steel, galvanized, 3 ramps, 900×2000mm/pc, silver colour.
Thickness: 50mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with rock wool inside, colour: white, bulge structure.
Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights: 8Units×4Pcs=32Pcs×7W, with LED, lighting boxes are powered coated, illumination ≥1500LUX
Intake from back upper, exhaust from rear upper, aluminum alloy frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system
Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h.
Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 5m ducts, 1 pcs 900 bend, 1 pcs 300 bend, 1 pcs intake hoop.
Infrared heating (diesel burner or gas burner heating is option).
Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type)
Spraying, baking, lighting switch, thermostat, power supply switch, emergency stop, pressure gauge, all motors is normal start, with pressure protect device and inverter.
18.5KW (Power supply 1×220V, 3×380V, 50HZ, different power supply is option)