Body Shop Paint Booth

Body Shop Paint Booth

Rear Side Draft Air Flow Standard Paint Booth Movable Infrared Energy Saving Features 1. Each unit with one 5.5kw fan for intake and exhaust. 2. Quality brand turbo fans, directly drive type. 3. Diesel burner heating system, and option for prep station. 4. Rear side draft air flow. 5, Continue...

Product Details

Fan:

Turbo Fan

Light:

Ceiling Light Only

Draft:

Rear Side Draft

Heating:

Diesel Burner

Installation:

Mount On The Concrete Floor

Curtain:

PVC Different Color For Option

Rear Side Draft Air Flow Standard Paint Booth Movable Infrared Energy Saving

Features

1. Each unit with one 5.5kw fan for intake and exhaust.

2. Quality brand turbo fans, directly drive type.

3. Diesel burner heating system, and option for prep station.

4. Rear side draft air flow.

5, Continue line with rail on floor option.

6, Led light and Scheider electric components.

7, Moveable infrared on the ceiling option.

8, Different job in different position at the same time.

9, PVC curtain between the stations.

Advantage

Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, down air flow comes out, and extraction from rear side directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. Mount on the concrete floor, easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. .

Below for Prep station:

Item

Detailed Specification

Inside dimension

6300×3450×2650 mm (L×W×H)

Outside dimension

7550×3550×3100mm (L×W×H)

Plenum dimension

6300×3450×450 mm (L×W×H)

Room body

Back side EPS wall panel, the other sides PVC curtain.

Light

Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.

Generator cabinet

Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.

Intake and Exhaust system

1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.

Purification system

Pre-filter, ceiling filter, fibreglass filter.

Roof

Galvanized steel

Control system

Fan switch, lighting switch, emergency stop.

Installs way

Hooked from roof by steel cable or supported by steel column.

Total power

6.7KW (Power supply 1×220V, 3×380V, 50HZ)

Below for spray booth:

Item

Detailed Specification

Inside dimension

6900×3900×2650 mm (L×W×H)

Outside dimension

7000×5200×3400mm (L×W×H)

Front door

Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.

Emergency door

1 units, 650×1800mm (W×H), colour: white.

Basement

Galvanized steel assemble, 300mm high, galvanized steel support, 2 rows grilles made by flat bar and twisted steel, silver colour, 3 rows indented plate, silver colour, 2 ramps, 520×2000mm/pc, silver colour.

Wall panel

Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.

Light

Ceiling Lights: 8Units×4Pcs=32Pcs×36W, no side lights, with LED, lighting boxes are powered coated.

Generator cabinet

Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.

Intake and Exhaust system

Inlet:1×5.5KW turbo fan, air capacity for each fan: 21000m3/h.

Outlet: optional, 4m ducts, 1 pcs 900 bend.

Heating system

BT18 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 180000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.

Purification system

Pre-filter, ceiling filter, fibreglass filter.

Roof

Galvanized steel

Control system

Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start.

Total power

7.5KW (Power supply 1×220V, 3×380V, 50HZ)





Inquiry