Components For Control:
Riello G20 Burner
With Side Light
LED Lights Standard Paint Booth Coating, Commercial Spray Booth Diesel Burner Heating Used For Car Painting
1, 7.5KW turbo fan for intake, 7.5KW turbo fan for exhaust..
2. All panels are tongue and groove interlock structure.
3, Riello diesel burner with #304 stainless steel heat exchanger.
4, All LED lights, energy save and more illumination.
5, Color white, blue, orange and red is optional.
6, OEM available.
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the booth which brings clean,
symmetrical and steady-going down airflow for spraying, After painting, hot air goes from heating
generators to plenum, then enters room after filtered by ceiling filter, and circulation, providing heat that is necessary for baking of cars surface. .
6900×3900×2650 mm (L×W×H)
Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
1 units, 650×1800mm (W×H), colour: white.
Galvanized steel assemble, in the ground, 300mm high, quadrate steel support, full grilles made by flat bar and twisted steel, galvanized, no ramps.
Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Ceiling Lights: 8Units×4Pcs=32Pcs×36W, side lights: 8Units×2Pcs=16Pcs×18W, with LED, lighting boxes are powered coated, illumination ≥1000LUX
Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.
Inlet and outlet system
Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h.
Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.
Italy RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.
Pre-filter, ceiling filter, fibreglass filter, activated carbon filter.
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start.
17.5KW (Power supply 1×220V, 3×380V, 50HZ)